Re: Initiate Orchestrator workflow via REST/Post with JSON body
Nope, unfortunately that didn't help.Nor would i expect it to actually as the accept header only deals with what the client (Fiddler in my case) will accept as a response from Orchestrator.
View ArticleRe: Use datastore cluster or RAID on a single host
Greetings. It's been a while. So I kept the ESXi install on my first drive. I used the "firmware" RAID to set the 2nd and 3rd drive in a RAID 1. I booted up ESXI and logged in from the vClient. It does...
View ArticleRe: Backup Network configuration
I am also looking for an answer to this question.I have 4 vlans configured.VLAN10 - Virtual Machine NetworkVLAN20 - VMKernel for StorageVLAN30 - VMKernel for VmotionVLAN40 - VMKernel for Management...
View ArticleRe: windows 2008 r2 sp1 guest VM -- safe to add/remove vCPU??
cjscol wrote: But as suggested you are probably best to just add the extra CPU to it and leave it like that, unless you only have 2 single core CPUs in your host or the CPUs are heavily used. A VM...
View ArticleRe: ESXi 5.1.0 SSH password prompt delay
Found the solution. 1. SSH to the ESXi host. 2. vi /etc/ssh/sshd.config 3. Add the following string:useDNS no 4. Save and quit vi 5. SSH to the ESXi host again. No delay!
View ArticleVDP Appliance Network Placement
Currently my VDP appliance is in the Virtual Machine Network. Based on the VDP appliance architechture and the way it performs backups, what is the best/most efficent VLAN to place the appliance in?...
View ArticleRe: I'm seeing cpu freezes at random in most of my VMs ESX4.0.0
Is HT Enabled on your hosts too?
View ArticleRe: VM can only communicate with VMs on same hosts
Yup...other VMs on the same vswitch communicate fine with VMs sitting on the DV switch. It has been a puzzler to me. Was thinking of creating a new NIC and setting that up to see if that would fix...
View ArticleRe: ESX Hosts PSOD (Unable to find correlating events via Log Insight)
Thank you for the excellent suggestions. I did confirm that my time range was not a limiting factor (searches were for 'All Time') and we had previously cycled the syslog process locally via 'esxcli...
View ArticleRe: Initiate Orchestrator workflow via REST/Post with JSON body
Burke,It looks like there only about 3 posts on the whole web about using JSON with the REST interface.Nor can i find any documentation on it. I can't understand why the support seems to be so poor as...
View ArticleClik here to view.
Re: vCenter DR Situation!
Thanks for the reply.It sounds like the 'resignature' option is the one I would use because I would expect to get SAN 1 back by 'hook or crook', I just need to test this out somehow.I am going to...
View ArticleRe: esxi 5.1 nested configuration.
You should be able to run Nested ESXi on this host, but as regards to performance that will very much depend upon what you are attempting to do.
View ArticleAutomatically delete VMs for VDI pool after period of time
We use Vmware View 5.0 but soon will upgrade to 5.2 and need functionality to automatically delete all VMs from selected pool after some period of time. We want to provision VDI for a project which...
View Articlehow to virtualize a old installed disk
Hello I use vmware Workstation 9, recently i have installed win8 to a new disk on my PC, andI haveto keep the old installed diskwithwin7. Now i want virtualizing my old win7 Installation from old disk...
View ArticleRe: Error 31: A device attached to the system is not functioning, Windows 7...
The fix is: Shut down Workstation.Open the registry (Start > Run > regedit).Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hcmon\.Create a new key called Parameters.In...
View ArticleRe: VMware vCenter Converter Standalone...
Try to install VMware vCenter Converter agent on source machine or try with installing Standalone VMware Convertor tool on source machine.
View ArticleRe: Problems with disk array in ESXi 5.1 U1(performance has improved)
Try to configure server with RAID 1 and install ESXi and monitor the performance.
View ArticleRe: ESXi 5.1 management network no connectivity with two nics connected
Download NIC drivers for ESXi 5.0/5.1 using vMA or Power CLI install the drivers once again and verify the status.
View ArticleVdcStorageProfile StorageCapacity
Apologies if this isn't posted in the correct forum. I'm a bit confused with all various vmware APIs I've found recently. I need to find the StorageProfiles used capacity for all VDCs using...
View ArticleRe: How to upgrade hardware on a VCenter server
Thank you both - now I feel really stupid!. I kept looking to see if I could find something - and missed it! And it was so obvious. Apologies I cant mark you both as correct
View Article